MFI- installing throttle arms, and throttle stops

[Alan.UK]

Hi,

I am rebuilding my MFI throttle bodies and wondered if anyone had a picture of the parts sequence on how each arms attaches. There is nothing in my parts or service manuals.

I have 6 small sprung washers and I am unsure if they go between the throttle body and the accelerator arm (to take up any slack) or they simply go under the nut.

I think it goes….

1) Return spring (over the throttle body)
2) Plastic sleeve (which fits into the spring)
3) Small sprung washer
4) Arm
5) Small serrated locking washer
6) Nut

Can anyone confirm this or post any images

Also can I set the throttle stops now? If so is there a specific value the butterflies should be set at?

Thanks

Alan