|
|
|
|
| Author |
|
|
Loose nut bhind the wheel
Join Date: Dec 2005
Location: Durham, NC
Posts: 262
|
7R case assembly help
I did a search on "case sealing" because I am within days of assembling my short block. I will order the green o-rings for the through bolts and #8 bearing. Now comes the confusion. There is no concensus on sealers. I have locktite 574 and curil T. Do I seal the perimeter with Threebond 1104 and #8 with Threebond 1211? Waynes book says one thing but there are so many others who disagree. Is there a majority who prefers a particular product since Wayne's book was printed? It is very confusing and this is the second case I have sealed in 15 years. The first leaked from day one, also a mag case and I only had Anderson's book and Porsche manuals as reference. The search revealed three pages of threads with differing advice.
__________________
Ed 1970 911S Targa 2.7RS MFI dual plug 10.5:1 1974 260Z SCCA ITS 1998 M3 |
||
07-31-2006, 10:21 AM
|
|
|
Slumlord
Join Date: May 2001
Location: Canada
Posts: 4,983
|
Go with Waynes advice. The only other person you should trust would be Henry.
__________________
84 Cab - sold! 89 Cab - not quite done 90C4 - winter beater |
||
|
07-31-2006, 04:42 PM
|
|
