![]() |
|
|
|
Registered
Join Date: Dec 2002
Location: SE Wisconsin USA
Posts: 34
|
Assembly questions
I am getting close to being able to start assembly of my 964 engine. I have a couple of questions:
Should I use RSR rocker shaft seals or are these not necessary? Do I need new drain back tubes? Do these “crush” when installed? What seals/o-rings will I need that are not included in the 2 overhaul kits commonly available? I have the lower end viton gasket set from EBS and the top end set from our host. Thanks, Jim |
||
![]() |
|
Wer bremst verliert
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 4,767
|
The RSR seals are worth using.
The drainback tubes should be fine and should not crush when being installled. If they are banged up they may shortened, you can bend them back or go with new ones. Those kits should have everything you need. Be sure to get assembly lubes..
__________________
2007 911 Turbo - Not a toy 1985 911 Cab - Wife's toy 1982 911 3.2 Indiash Rot Track Supercharged track toy 1978 911 3.0 Lichtbau toy "Gretchen" 1971 911 Targa S backroad toy |
||
![]() |
|
Registered
Join Date: Dec 2002
Location: SE Wisconsin USA
Posts: 34
|
Thanks John.
__________________
Thanks, Jim 64 356 - SC Street Concours 92 964 - C2 Track 97 993 - C4S Street (gone) 12 997.2 TTS Street |
||
![]() |
|