Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   911 Engine Rebuilding Forum (http://forums.pelicanparts.com/911-engine-rebuilding-forum/)
-   -   Recommendation for 2.7 P&C wanted (http://forums.pelicanparts.com/911-engine-rebuilding-forum/403835-recommendation-2-7-p-c-wanted.html)

304678 04-14-2008 10:36 AM

Recommendation for 2.7 P&C wanted
 
Excuse my ignorance but I am sorting things out for a friend. He has a 2.7S (1976) and could use new P&Cs instead to refurbish his current set. Is there an (affordable) alternative for Mahle?

Thanks in advance,

Richard

304065 04-14-2008 11:21 AM

Richard, only nikasil is QSC, search under 'QSC" and "Supertec" for more

YTNUKLR 04-14-2008 11:40 AM

replated cylinders...and in-spec Mahle pistons that were made for Nik

or replated cylinders and JEs

or QSC

cnavarro 04-15-2008 04:05 AM

We make 89 to 93mm for the 2.7, but there is the "affordable' tag in the above post, and we're the most expensive. They are in the Pelican catalog.

304678 04-15-2008 04:16 AM

Thanks John. I contacted Henry.

Scott. We consider to have the cyl replated and new rings for the pistons. We would like to compare those costs vs an alternative new set like apparently QSC.

Charles. Affordable because it's for a guy who only drives 2000 mls a year, the car being a 76 and the owner who is not too dedicated to Porsche.

Thanks for the replies.

Richard


All times are GMT -8. The time now is 06:26 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.