|
|
|
|
| Author |
|
|
Registered
Join Date: May 2005
Posts: 1,118
|
Recommendation for 2.7 P&C wanted
Excuse my ignorance but I am sorting things out for a friend. He has a 2.7S (1976) and could use new P&Cs instead to refurbish his current set. Is there an (affordable) alternative for Mahle?
Thanks in advance, Richard |
||
04-14-2008, 10:36 AM
|
|
|
Moderator
Join Date: Dec 2001
Posts: 9,569
|
Richard, only nikasil is QSC, search under 'QSC" and "Supertec" for more
__________________
'66 911 #304065 Irischgruen ‘96 993 Carrera 2 Polarsilber '81 R65 Ex-'71 911 PCA C-Stock Club Racer #806 (Sold 5/15/13) Ex-'88 Carrera (Sold 3/29/02) Ex-'91 Carrera 2 Cabriolet (Sold 8/20/04) Ex-'89 944 Turbo S (Sold 8/21/20) |
||
|
04-14-2008, 11:21 AM
|
|
|
up-fixing der car(ma)
|
replated cylinders...and in-spec Mahle pistons that were made for Nik
or replated cylinders and JEs or QSC
__________________
Scott Kinder kindersport @ gmail.com |
||
|
04-14-2008, 11:40 AM
|
|
|
Registered
Join Date: Oct 2001
Location: Momence, IL 60954
Posts: 1,911
|
We make 89 to 93mm for the 2.7, but there is the "affordable' tag in the above post, and we're the most expensive. They are in the Pelican catalog.
__________________
Charles Navarro President, LN Engineering and Bilt Racing Service http://www.LNengineering.com Home of Nickies, IMS Retrofit, and IMS Solution |
||
|
04-15-2008, 04:05 AM
|
|
|
Registered
Join Date: May 2005
Posts: 1,118
|
Thanks John. I contacted Henry.
Scott. We consider to have the cyl replated and new rings for the pistons. We would like to compare those costs vs an alternative new set like apparently QSC. Charles. Affordable because it's for a guy who only drives 2000 mls a year, the car being a 76 and the owner who is not too dedicated to Porsche. Thanks for the replies. Richard |
||
|
04-15-2008, 04:16 AM
|
|
