Camtiming

[linnefell]

Hi I wounder if any one can recommend how I should set the timing
Have a 930 engine with SC cam. original should set 1mm. but with this cam should i go for 1,4mm. or more??
the engine is now 3.2 liter and have JE pistons and ported heads etc.
big turbo.
Lennart

[MBEngineering]

HI Lennart
I would set the cam timing at 1.4-1.7 for the SC cams , but if you engine spec is as good as you describe, i would have gone for the group "B" cam.

regards mike

[linnefell]

yes the engine is wery nice