|
|
|
|
| Author |
|
|
Registered
Join Date: Sep 2005
Location: South SF Bay Area
Posts: 106
|
911 fan removal
Just wanted to share my procedure for removing the fan from a 911 alternator without having to resort to using a hammer and punch which can easily damage the fan.
See the attached picture, I use an inexpensive puller with the arms removed and threading nylon ties (they can take up to 75lbs) into the hub of the fan I can easily pull the fan off without distorting it. You can also use a three arm puller to disrtibute the load even more. 
|
||
08-16-2008, 07:49 AM
|
|
|
Registered
Join Date: Jan 2004
Location: CT
Posts: 11,567
|
Pretty clever...I'll have to try this next time I remove a fan.
__________________
Tom Butler 1973 RSR Clone 1970 911E 914-6 GT Recreation in Process |
||
|
08-16-2008, 01:36 PM
|
|
|
Less brakes, more gas!
|
I just run a 1/4-20 tap through two opposite holes (the ones in the center of the fan) and use 2 screws... 1/4 turn each screw repeatably pops it right off in minimal amount of time.
__________________
 Michael '82 Euro SC 'Track Rat' 22/29 Hollows, 22/22 Tarrets, Full ERPB F/R, Rennline Tri Brace, Glass bumpers, Pro 2000's, 5 pts, blah blah blah '13 Cayenne GTS |
||
|
08-16-2008, 03:53 PM
|
|
Ugly Betty
