|
|
|
|
| Author |
|
|
3 restos WIP = psycho
Join Date: Feb 2005
Location: North of Exit 17
Posts: 7,665
|
Any ideas on these rods?
I picked up a set of rods that had this label on the box - what the hell does "Big Housing Bore" mean:
 Not sure what it means. I did a rough mic of the bores and came up with this:   I don't have my books with me today; what is the spec for rebuilt 2 liter rods?
__________________
- 1965 911 - 1969 911S - 1980 911SC Targa - 1979 930 Last edited by kenikh; 10-30-2008 at 03:19 PM.. |
||
10-30-2008, 08:29 AM
|
|
|
Registered
Join Date: Jan 2004
Location: CT
Posts: 11,538
|
Kenik
The big end should measure 61.00-61.019 mm with the bearing installed. The wrist pin end should measure 22.020-22.033 mm with the bushing installed.
__________________
Tom Butler 1973 RSR Clone 1970 911E 914-6 GT Recreation in Process |
||
|
10-30-2008, 04:48 PM
|
|
