|
|
|
|
| Author |
|
|
Rbutts
|
Tight intakes
I'm in the process of putting mod 's cams in my 3.2 short stroke.Before pulling rockers and cams I checked valve lash just for curiosity.Intakes had 0 lash and exhaust were at .004.About 6000 miles I put pmo's on it.Would this cause the valves to seat deeper into the seats ? Leak down is 1 to 2%.Gas leaking down intake, or did I just screw up during my valve adjustment.
Thanx,Rob Butler |
||
01-08-2009, 03:12 PM
|
|
