|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2003
Location: Milky Way Galaxy - 3rd Stone
Posts: 871
|
911 Early and Late Oil Line Fittings
I have a 914/6 2.7L CIS conversion (It's fast enough). My oil temps are in the 240 range, on a fairly cool morning and running it up and down the freeways.
Have a Long Tru Cool which I have used before. Problem is to adapt the Porsche Hose Connectors (13mm or 19 mm I.D) to a 1/2" NPT cooler inlet. Does anyone make an 90 degree elbow that would have the Porsche connector (male) on one end and the other half inch pipe thread? Or is this a make-it- yourself connector? Long shot, I know.
__________________
Ron Meier Backyard Shadetree Mechanic 1974 914/6 conversion with 2.7L (The Grey Ghost) 1973 Chalon with 2.4T MFI (Schlitzalom) All my 4 cylinders are gone 
|
||
08-25-2009, 07:10 PM
|
|
|
Registered
Join Date: May 2004
Location: Boulder, Colorado
Posts: 7,275
|
Not just sure of your plumbing.
However, you can buy a screw in 90 degree 1/2" NPT elbow with AN-12 Male threads on the other end. And you can purchase an AN to Porsche adapter. If our host doesn't sell these adapters, try Pegasus. Walt Fricke |
||
|
08-25-2009, 11:06 PM
|
|
