|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2009
Location: San Diego, CA
Posts: 37
|
Recommendation for machine shop in San Diego
Can any of the San Diego Pelicans recommend a machine shop for a 911 3.2 engine?
I need new valve guides, a valve grind, checking clearances on Ps & Cs, cylinder hone and replacement of head studs. Thanks Seth
__________________
--------------- 1984 Carrera and about 150 ziplock baggies. |
||
02-07-2010, 01:49 PM
|
|
|
greg79s
Join Date: Sep 2009
Location: Folsom Ca.
Posts: 56
|
Scott's Porsche
National City Ca. Give them a Call. |
||
|
02-07-2010, 11:21 PM
|
|
|
Registered
Join Date: May 2003
Location: San Diego, CA
Posts: 191
|
Motor Works in national city is a machine shop that can get your stuff done quickly and has pretty reasonable prices. Many local independent porsche shops use these guys.
Motor Works If you want some advice as well I would take the work up to Supertec in fallbrook. Its a bit of a drive but if you have any questions about your motor build you can bounce them off Henry when you drop the stuff off. Last edited by jjrowe; 02-08-2010 at 08:24 AM.. |
||
|
02-08-2010, 08:21 AM
|
|
