|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2002
Location: SE Wisconsin USA
Posts: 34
|
964 cam tensioer won't compress
Rebuilding a 92 964 3.6 after a broken valve spring in number 5. Upon reassembly I notice the right side (4-5-6) cam chain tensioner won’t compress like the left side does. Could the tensioner shaft have bent when I dropped the valve? The head, piston and cylinder where trashed as a result of the broken valve spring/dropped valve. Are these tesioners rebuildable? Does anyone have a good used one?
__________________
Thanks, Jim 64 356 - SC Street Concours 92 964 - C2 Track 97 993 - C4S Street (gone) 12 997.2 TTS Street |
||
03-27-2010, 12:38 PM
|
|
|
Registered
Join Date: Dec 2002
Location: SE Wisconsin USA
Posts: 34
|
Well….after some gentle probing in the oil inlet side some rather nasty looking oil came out and it now functions as the other tensioner. Could have been “hydraulic lock”?
__________________
Thanks, Jim 64 356 - SC Street Concours 92 964 - C2 Track 97 993 - C4S Street (gone) 12 997.2 TTS Street |
||
|
03-28-2010, 07:54 AM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
