|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2010
Posts: 1
|
article discussion
In pelicanparts use hardwood dowel to drive the wrist pins out.you don't want to put a heck of allot of cross load on the connecting rods so don't spank them too hard.
__________________________________________ Want to get-on Google's first page and loads of traffic to your website? Hire a SEO Specialist from Ocean*Groups* seo specialist |
||
08-10-2010, 12:52 AM
|
|
|
Registered
|
Conn rods are fairly tough if you need a lot of force to drive out wrist pins there is something wrong stop. I used the handle end of a screwdriver and mine came pretty easily...
__________________
Davy 82 911 SC Targa Sold 12 Audi A5 Sportback 3.0 TDI Quattro 03 996 C4S |
||
|
08-10-2010, 02:41 AM
|
|
|
Registered
Join Date: May 2003
Posts: 3,346
|
Heat the head of the piston with a propane torch. The pins will then slip right out.
-Andy
__________________
72 Carrera RS replica, Spec 911 racer |
||
|
08-10-2010, 09:31 PM
|
|
Misty
