With the air box!!!
http://forums.pelicanparts.com/uploa...1295411946.jpg
http://forums.pelicanparts.com/uploa...1295412002.jpg

Nice. Stupid question -- why is the airbox on prior to putting it back in the car?

Eye candy baby!

It's been some time since I posted a few pic of current projects before I put her on the road.
Here are a few updates to the front bumper oil cooler. I had to sell the larger oil cooler pictured on the first page, due to length and hitting the RS bumper...plus no back space for air flow.

http://forums.pelicanparts.com/uploa...1311471889.jpg
http://forums.pelicanparts.com/uploa...1311471905.jpg
http://forums.pelicanparts.com/uploa...1311471916.jpg
http://forums.pelicanparts.com/uploa...1311471929.jpg
http://forums.pelicanparts.com/uploa...1311471940.jpg
http://forums.pelicanparts.com/uploa...1311471951.jpg
http://forums.pelicanparts.com/uploa...1311471962.jpg

Here she is at the AT Speed Open House this past weekend.

http://forums.pelicanparts.com/uploa...1319679244.jpg

awesome...!! did you skip a bunch of stuff you can tell us as the last pics show the car on the lift in July...you realize it is almost November now...we need details...please... :-)

Great to hear that it is on the road...ENJOY...
Bob

Hey Scott, good seeing you at Bobs. The engine looks great, enjoy.

Rob

Nice, you added the passenger side mirror as well. Looks good but completely unusable (I did the same thing). I also noticed your MFI is really close to the throttle bar. When I put mine back together it rubbed and was a bit a extra work to reposition the MFI pump to make it not touch. Just out of curiosity, did you have this same issue?

Fun project

Chris
73 911 E

Chris,

Sorry for the late response - there is no issue at all. Just a bad photo angle.
I have about 1000 miles on the motor, the break-in oil was drained and Brad Penn oil replaced for the next 5,000 miles. All adjustments were done...it's a real strong motor.

I'll drive her to the Chesapeake Porsche Club after Holiday Party, in Jan 2013.
Vr,
Scott

Took a few photos today with the sun out. As you can see I installed the H4's, replaced the vinyl dash plate, made a radio delete to install two stop watches with German made mounts, self painted the spare 1968 (5.5 x 15) Heart Fuchs, and switched over to anodized trim around the windows. Did not install the trim around the windshield -- plan to pull the glass the repair the dash pad this winter.
Enjoy,
Scott

http://forums.pelicanparts.com/uploa...1357524883.jpg
http://forums.pelicanparts.com/uploa...1357524894.jpg
http://forums.pelicanparts.com/uploa...1357524908.jpg
http://forums.pelicanparts.com/uploa...1357524918.jpg
http://forums.pelicanparts.com/uploa...1357524926.jpg
http://forums.pelicanparts.com/uploa...1357524943.jpg
http://forums.pelicanparts.com/uploa...1357524967.jpg
http://forums.pelicanparts.com/uploa...1357524996.jpg
http://forums.pelicanparts.com/uploa...1357525035.jpg
http://forums.pelicanparts.com/uploa...1357525053.jpg

Very nice. Thanks for sharing.

henry

It has been 3 years since posting to this thread. I have TTG lights and Cibie hood lights ready for mounting, and plan to install this winter.
Question, who has. Wiring diagram for adding the two sets of lights ?
Vr,
Scott

Hey Scott, you can swing by take a look at my Targa it has TTG lights

Update with the alternate steel hood painted and the hood lights installed.

http://forums.pelicanparts.com/uploa...1497834407.JPG

Just an update to what I’ve done to the 1970 911T.
Scott

http://forums.pelicanparts.com/uploa...1641065056.jpg
http://forums.pelicanparts.com/uploa...1641065056.jpg
http://forums.pelicanparts.com/uploa...1641065056.jpg
http://forums.pelicanparts.com/uploa...1641065056.jpg
http://forums.pelicanparts.com/uploa...1641065056.jpg
http://forums.pelicanparts.com/uploa...1641065056.jpg

Looks great Scott. Nice job.

Mark,
Your MFI pump adjustment on my 013 S pump was perfect! It has never run better?
Adjusting to the special high compression motor was on mark…Mark !