Camshaft identification

[hbrand]

I recently bought a 1972 911E Coupe, with camshafts installed with "SE" markings in the front.
It is an MFI engine, 1973, unknown pistons-cylinders. The valve overlap is adjusted to 50, there are solid chain tensioners installed.

Please identify those cams.

Thanks, Harold

[bavaria911]

Harold,
I tore down my 2.4 E (1973) motor to find it has 2.2S P&Cs and the S/SE cams.
A few pelicans told me both cams were 911S and the SE was for both the S and E motor.
Here are my two:





I still have the 2.4T MFI system in the basement.... Hope the Florida weather is better than Marylands.

Scott

[hbrand]

Scott, those are the same I have.
so the overlap is OK, the problem wit 2000-3000 RPM missing is then somewhere else.
The MFI number is 13= 911T but it lucks rebuild. Maybe to S specs too. I did one day of adjustments, it is better now but still there.

Thanks, Harold