Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   911 Engine Rebuilding Forum (http://forums.pelicanparts.com/911-engine-rebuilding-forum/)
-   -   I dragged it home... (http://forums.pelicanparts.com/911-engine-rebuilding-forum/603110-i-dragged-home.html)

Flat6pac 05-11-2011 06:05 PM

I got it off the stand and on the table, got a good cross over pipe installed.
The injection came home today from the cleaning and the changing of the fuel line rubber hose. I got a clean band for the fan, now I m just waiting for the cam line reducers to get here. n Going to clean the transmission tomorrow and get it on the engine..Be putting this back in the red car by Saturday..with some luck.

Bruce

http://forums.pelicanparts.com/uploa...1305165843.jpg
http://forums.pelicanparts.com/uploa...1305165898.jpg

ninesixfour 05-11-2011 07:06 PM

Nice and clean Bruce. Man you work fast.

onboost 05-12-2011 06:31 AM

Quote:

Originally Posted by ninesixfour (Post 6016973)
Man you work fast.

Yes he does. :eek:

Flat6pac 05-13-2011 03:56 PM

Well, I got the tranny cleaned off today, mostly road grime. The last things to do now is put the speed control body up on location after I get the engine sound deadner up on location.
Fresh trans fluid in from PP today along with the cam oil line reducers. If it rains the engine will be in tomorrow, if it doesnt rain, Honeydo list is posted...
Bruce

http://forums.pelicanparts.com/uploa...1305330790.jpg
http://forums.pelicanparts.com/uploa...1305330845.jpg
http://forums.pelicanparts.com/uploa...1305330902.jpg
http://forums.pelicanparts.com/uploa...1305330958.jpg

peppy 05-14-2011 07:39 AM

Looks great Bruce....+1 on you are fast.

Flat6pac 05-14-2011 12:46 PM

Saturday..noon, its off the table and ready to set on the jack with the PP Carrera balance unit.
Carrera is up in the air for installing the engine and trans. Company came about 3pm and was able to hand me the bolts and ratchet.
Seems like I m fast to you but I m retired for years and I love the build.
Bruce


http://forums.pelicanparts.com/uploa...1305405738.jpg
http://forums.pelicanparts.com/uploa...1305405814.jpg
http://forums.pelicanparts.com/uploa...1305405886.jpg

Flat6pac 05-16-2011 04:24 PM

It would have started earlier, I found that no matter how much I charged the battery I still need to plug in the 14 prong connector. With that resolved and realizing I needed to replace the fuel relay that was sitting on the seat, its running on all 6....

Bruce
http://forums.pelicanparts.com/uploa...1305591689.jpg

Lots of smoke but no leaks

http://forums.pelicanparts.com/uploa...1305591804.jpg
http://forums.pelicanparts.com/uploa...1305591858.jpg

PFM 05-16-2011 07:49 PM

Bruce,

Nice work and yes fast in my book too.

Stay tuned!!!

PFM

Flat6pac 05-17-2011 12:40 PM

It jumped up on the road on its own power all the way to 5000 for a second. The last time I drove it, the heads were loose and all it did off idle is pop pop.
On top of the drive way on its own power.
Bruce

http://forums.pelicanparts.com/uploa...1305664760.jpg
http://forums.pelicanparts.com/uploa...1305664821.jpg

Flat6pac 05-19-2011 09:49 AM

We have to change the alternator, there is squeel in the one we have on the engine. We drove it up and sown the street to bring the temp up, runs better than the friends 88, so he says.
Did the compression, 175+ to 183 all around. Cant ask for anything better.

Bruce
http://forums.pelicanparts.com/uploa...1305827240.jpg

Fresh rebuilt Paris Rhone goes in today.
http://forums.pelicanparts.com/uploa...1305827338.jpg

350HP930 05-19-2011 10:54 AM

Great work Bruce!

Flat6pac 05-28-2011 10:45 AM

The paris Rhone is a week late getting on but we perserved
The old alternator was noisy and putting out 12.5 v so to day were changed out and producing better.
The DME has never been opened..unusual
Were getting 14.08 v at the battery today.
Bruce

http://forums.pelicanparts.com/uploa...1306607911.jpg
http://forums.pelicanparts.com/uploa...1306607967.jpg
http://forums.pelicanparts.com/uploa...1306608217.jpg
http://forums.pelicanparts.com/uploa...1306608277.jpg
http://forums.pelicanparts.com/uploa...1306608322.jpg

Flat6pac 07-20-2011 05:58 AM

Its been a six weeks but the car is dragged home again. Fresh from the body shop, painted, buffed out and looking good. Now to get the top on and its ready to go away....
Bruce

http://forums.pelicanparts.com/uploa...1311170150.jpg
http://forums.pelicanparts.com/uploa...1311170212.jpg
http://forums.pelicanparts.com/uploa...1311170279.jpg

gamin 08-19-2011 01:03 PM

Bruce - What's the latest?

Flat6pac 08-27-2011 03:42 PM

The top is back, on the car and as soon as the hurricane goes away I ll have it in the light to get a couple pictures to post.
Bruce

Flat6pac 08-30-2011 04:59 PM

Well, the car is done. I got the roof installed and all is looking good.
Hope you enjoyed the sweetening of the Targa.
Bruce
http://forums.pelicanparts.com/uploa...1314752145.jpg
http://forums.pelicanparts.com/uploa...1314752243.jpg
http://forums.pelicanparts.com/uploa...1314752302.jpg
http://forums.pelicanparts.com/uploa...1314752362.jpg

911Freak 08-30-2011 06:17 PM

Another one saved! Well done Bruce.

I sub'd all of your threads as you're a talented guy that does nice-detailed oriented work on our beloved aircooled 911s. I look forward to the next project!

Cheers
Jason

911jettat 09-02-2011 08:21 AM

Awesome thread Bruce!

After a couple years of 964 ownership, I'm getting more and more comfortable working on my car, but I'm reaching the limit at what I feel comfortable with. I really wish I knew someone like you in my neighborhood. I need a mentor, anyone with Bruce's skill live near Chapel Hill, NC? I'm interested in every aspect of the car, so feel free to send me a message if you need extra hands?

Alan Goettel 09-05-2011 02:29 PM

Nice Work
 
I wish I was half as fast. SmileWavy

stevie 77 930 09-06-2011 02:33 PM

ummmm......Show us the 930 too


All times are GMT -8. The time now is 07:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.