|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2004
Location: san jose
Posts: 4,982
|
964 valve adjust
I don't know why, but when I started to check my valves to do a valve adjust again, cyl 1 was at .125 mm not .1 mm and it looks like I was using a .15 mm shim for this last time.
correct me if I am wrong, but no matter what grind elgin did to my cam, I should still set the valves to .1 mm. correct?
__________________
steve old rocket inguneer |
||
02-12-2012, 09:31 AM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,522
|
The cam doesnt change the spec for the engine. The spec is a measuerment on the back side of the lobe and you rock to .1mm.
Bruce |
||
|
02-12-2012, 10:27 AM
|
|
|
Registered
Join Date: Dec 2004
Location: san jose
Posts: 4,982
|
thanks, I thought so, but my mind slips in old age.
__________________
steve old rocket inguneer |
||
|
02-12-2012, 10:45 AM
|
|
