|
|
|
|
| Author |
|
|
It's a trap...
|
Will cam tools work for my '81 SC?
I just bought the cam tools and they say for up to 1980. Will they work on my 1981 SC?
__________________
Run like the wind, straining the limits of machine and man.... 2006 Atlas Gray Carrera 4, '81 911SC Black on Tan (SOLD), 2006 Acura RSX Type S, '13 Dodge Durango (wifeys). |
||
04-10-2012, 04:12 PM
|
|
|
Registered
|
Look and see.........
You will have to pull the cam cover plates and take a look. The change supposedly came in 1980 so it is a good chance you will need the later tools. The good news is that the cams with bolts are easier to deal with than those with the 46mm nuts.
__________________
FEC3 1980 911SC coupe "Zeus" 3.3SS god of thunder and lightning |
||
|
04-11-2012, 03:56 AM
|
|
|
It's a trap...
|
Does this look like the 46mm nut??
Here is a snapshot. Does this setup look like the tools will fit??
__________________
Run like the wind, straining the limits of machine and man.... 2006 Atlas Gray Carrera 4, '81 911SC Black on Tan (SOLD), 2006 Acura RSX Type S, '13 Dodge Durango (wifeys). |
||
|
04-11-2012, 05:53 PM
|
|
|
Registered
|
46-mm crow foot.......
Quote:
The 46-mm (P-203) is what you need for your cam nut ('78-'81) and a camshaft counter holding tool (P-202). If you have an SC Bentley shop manual, look at page 152-1. Tony |
||
|
04-11-2012, 06:54 PM
|
|
|
It's a trap...
|
Thank you
I was hoping I would hear that. those are what I ordered. Cheers.
__________________
Run like the wind, straining the limits of machine and man.... 2006 Atlas Gray Carrera 4, '81 911SC Black on Tan (SOLD), 2006 Acura RSX Type S, '13 Dodge Durango (wifeys). |
||
|
04-11-2012, 07:04 PM
|
|
Speed Buggy
Zeus (god of thunder and lightning)
