|
|
|
|
| Author |
|
|
Registered
Join Date: Feb 2004
Location: UK
Posts: 2,230
|
Crank Pulley Bolt
I have been looking for a 'Flange Bolt' for the bottom pulley for a early 911 Engines but can't find one with a 12 x 1.5 pitch.
I thought I would try a 993 bolt but these are shown in the PET as being M14 x 1.5 x 33 and won't fit. Unbrako don't make a Durlock with the correct pitch and I haven't found one anywhere else. Any ideas? |
||
05-01-2013, 07:18 AM
|
|
|
Schleprock
Join Date: Sep 2000
Location: Frankfort IL USA
Posts: 16,639
|
Is 999.093..005.02 (M12 x 1.5 x 22) too short? This is the factory bolt I have on my '87 3.2L engine. It's a Durlok and boy does it grip good.
__________________
Kevin L '86 Carrera "Larry" |
||
|
05-01-2013, 12:27 PM
|
|
|
Registered
Join Date: Feb 2004
Location: UK
Posts: 2,230
|
Thanks,
I ordered one yesterday but didn't know it was a Durlock as the PET still shows a regular bolt with a spring washer and one of the UK after market suppliers shows hex head 'patch' bolt in a photograph. Last edited by chris_seven; 05-01-2013 at 11:09 PM.. |
||
|
05-01-2013, 11:04 PM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,473
|
The early bolt is a 12mm with a 19mm head and the Carrera bolt has 17mm head.
Bruce |
||
|
05-02-2013, 04:25 PM
|
|
