34mm Venturis for Zenith 40 TINs - anybody want a set?

[unclebilly]

I am getting some 34mm Venturis made up for some Zeniths. These will be CNC machined and a big chunk of the cost is in the programming.

I am hoping to get one or 2 extra sets made up to amortize the programming costs over 18 parts instead of 6.

Who is interested in a set at $150/set of 6 shipped in Canada / USA? These will be made from 6061 Aluminum and will drop into your Zenith 40 TIN carbs with no modifications.

I have no idea what MotorMeister chages for his. I know that PMO charges $100 for a set of 6 for Webers but he is working on a bigger target audience.

I am getting 34mms done because these work with a 2.7L engine used for track / or a 3.0L for street use.

Let me know if you are interested. I am going to pull the trigger on quantity this afternoon. I should be in a position to ship these by Thursday.

[Mexicoearly911]

Do you still have a set. Im very interested

Regards

[TVRLOTUSTR3]

You can use Weber chokes with a spacer, if I remember it is about a 4mm ring.