Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > 911 Engine Rebuilding Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered User
 
Join Date: Feb 2004
Location: UK
Posts: 2,231
Flywheels and Clutches

I have been looking at 6 bolt and 9 bolt Flywheels to suit 225mm clutches and there are some features that I would like to clarify.

The inside diameter of the clutch friction face is 140mm diameter on the 6 bolt flywheel and 147mm on the 9 Bolt Flywheel.

Does anyone have any details with regard to the 225mm clutch plates fitted to the 6 bolt and the 9 bolt cranks as I always believed, perhaps mistakenly, that they were interchangeable.
Old 10-02-2016, 06:30 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered User
 
Join Date: Feb 2004
Location: UK
Posts: 2,231
I had a dig in 'our stores' and have found all 3 types of '225mm' flywheels.

Type 1 is 6 Bolt with early press fit Pilot bearing from 2.2 litre and maybe 2.4 litre

Type 2 is 9 bolt with early press fit pilot bearing from a 1978 SC

Type 3 is 9 bolt with later bolt-in Pilot bearing.

They all have 147mm ID for the clutch face so the 140mm that I have on a 3rd party supplied 'RSR' flywheel may be incorrect.
Old 10-02-2016, 08:28 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Reply

Thread Tools
Rate This Thread
Rate This Thread:

 


All times are GMT -8. The time now is 02:55 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.