Quote:
Originally Posted by jimbeaux911
Correct, even with the valve open to the WUR loop, the pressure held at 105 psi.
I have messed with the WUR to the point where I pull it up then tap it down to adjust hte pressure, I had the cylinder completly removed from the unit at one point, and if I press on the bottom diaphram the pressure INCREASES. Running the FP with the WUR cylinder removed from the unit still results in 105 psi. In or out it does not matter.
|
Now I'm really confused.
Do me a favor and look at the drawing, below, and tell us which parts you pulled up and down, and which was the cylinder that you completely removed.
If the parts you dealt with are not labeled, just describe them according to the diagram. I'm having a hard time visualizing what you've been manipulating.