|
I must have had the old type. They looked like real wires, but after I cut one apart I saw the inferior construction methodology. BTW, I have spoken with R. Clewett in the past; first class guy and bright innovator. These wire were not one of his better products. Car ran like crap with these wires.
It was recommended to me to use MSD wire. My new coil packs have the old Chevy HEI type connector. The MSD wound wire is 8.5mm. The Beru factory wires I currently have are the screw end terminals at the plug connectors, which I would like to use again. I don't know if I can squeeze the wire into the rubber, and the Beru connectors seem to be only available in 7mm wire OD. So, I have to find the equivalent to MSD in a smaller diameter, or larger Beru connectors, or plug connectors that will work with the bigger wires. Someone told me that Mercedes has the same setup on certain models as the SC has.
__________________
Patrick E. Keefe
78 SC
|