Quote:
Originally Posted by boyt911sc
Rick,
The TL should light up. Make sure you have tested the TL using a known good ground source before using terminal #85. If terminal #85 is not grounded;
a). The electrical plug to the AFS (air flow sensor) switch could be unplugged or defective.
b). The brown wire between terminal #85 and the driver-side pin at the plug or connector is open.
c). You need to test the continuity between terminal #85 and the AFS switch.
d). The sensor plate is misaligned and not coming in contact with the ground contact.
e). Everything OK except the passenger side terminal (AFS) is not grounded.
These are the conditions you have to test and verify. One step at a time. Have you checked if the electrical plug to the AFS switch is connected or not? You did not mention anything about it. Keep us posted.
Tony
|
The switch is plugged in as I replied in post 7. In your first post you mentioned that it should not lite up, and if it did then I have a problem. That might have been a typo. I will check the rest of your suggestions and report back . I am doing this with the key in the off position, is that correct? By the way , I checked all of the other ports and they all lite up.
Rick