[ajs18s]

Ok, first time to do a throttle body sync, I pulled both bodies of to clean them as there was a build up of a blackish, sticky crud. All back together no problems, now with my homemade throttle sync tool set the idle speed no problems, I did how ever adjusted the cable on the LHS but just a little, I was happy with myself as I set the adjustment at 2500 and 4000rpm. It idled and sounded nice. Test ride for 5 minutes and all good. This morning I was about for about 25ks from home, and was nice and warm, then spluted quite aggressively and felt like it almost stalled, for about 5 seconds, was sitting at about 3000 rpm. I was out for about 1 hour and it continued, at different speeds and RPM's.
The bike also use to unobtrusive backfire and pop when closing the throttles at high RPM's but no more....
I have only had the bike for around 12 months and has 65,000ks on it, when I first put the sync tool on it it was way out of adjustment and also feels very lethargic.
Hope my rambilings all makes sence