|
UMMM... Porsche... color code 741 or 041. Or order right through Pelican.
Probably cost ya' $25 bucks...
I am a professional and I use the factory touch up sticks most often. It's solvent based "lacquer". Add a splash of lacquer thiner and shake it well. Use a small artists brush or a toothpick to apply.
Layer over several days for larger chips and then color sand flat with a hard block and 2000 grit. Follow up by polishing.
You can also source Duplicolor "Black" touch up sticks at most FLAPS. It matches fine.
If you really need to cover a bigger area you might search out a local paint supplier and buy a 1/2 pint of single stage black (741) acrylic urethane. You'll need the color, activator, and reducer (thiner). Likely cost $75-$125.
Take your time with the touch up! If it's a big chip, layer it. Be pacient and let it dry. Use a hard flat sanding block to level it!! Do NOT fold up the paper and hand sand it... Once it's flat, hand polish the area with a medium polish like 3M "rubbing compound" found in small bottles at your FLAPS.
You can also use the cream version of Blue Magic metal polish.
Good luck with the touch up.
|