Howdy all,
Well, my 90 964 has started leaking oil at the base of the cylinders. I addressed some former leaks, eg timing chain covers, valve covers, etc. I'm not the best at turning a wrench, so I'm putting my car in more capable hands. The oil leaks leave 50 cent size drops from several places on the driver's side. It also appears that oil is blowing back. I know this after power washing the underside of the engine.
I've got three quotes for the job which ranged from $4900 to $5600. I will say the more expensive quote goes on to replace a lot more than just doing the cylinders, eg RMS etc. While talking to these 3 mechanics, each on of them called it a reseal. However, not all of them covered the same items to be resealed.
My questions is, "How far off am I from just having a top end job done vs. a "reseal"? I'm wondering, because if the ceramic pots need replacing, or valves, or XXX needs replacing, what I'm I looking at in terms of cost vs the above quotes?
I'm posting a couple of pics which show the cylinder leaks.
TIA,
HB
