Quote:
Originally Posted by MichiganMat
Just finished my rebuild and Im not getting any oil at all in the left side cam hose. My gauge in the dash says that Im getting good pressure to the right side, and loosening the fittings on that hose shows lots of oil in the line. I can't for the life of me figure out why the left side would be dry though. Any thoughts?
Im trying to find the routing pictures for how oil is routed to that outlet in the case but I honestly can't find it.
|
MM,
Test if oil is coming out from the supply point. Remove the ignition distributor and oil line connected to the crankcase for the left side (cylinder 1-2-3). Disable the FP and ignition. Crank the engine using the starter and look closely if oil is spewing out from the fitting. Place some rugs by the fitting just in case it started spraying oil (?). If oil is not coming while cranking the engine, there is blockage or restriction in the oil passage (crankcase).
Tony