So the saga continues.
I hooked the meter up (inline with red on wire from CDI and black on CDI connection on distributor. I get a 4-5volt reading at first that drops to under 3v. Then as I rotate the engine the voltage drops to .184 or something until the points close and back to 2.2V. Battery was just charged up.
I did find the cap, rotor, points and condenser and they are on the way so hope to eliminate those as issues. Car has original parts is seems to time to replace these 40 year old parts anyhow.
https://www.youtube.com/watch?v=ZnC7UtGrZi0