I have an MSD 6AL model 6420 installed by the previous owner (great guy, very active on pelican). I've been reading some past posts about the MSD wiring and I have two questions:
(1) It seems that a lot of folks say you must run the green and violet wires in a separate harness. Right now, they are running into the 6pin with male quick connects. Do they need to separate all the way to the distributor or is it okay to be separate up to the old connector?
(2) I've also seen posts saying that the green and violet wires need to be reversed. Is it safe for me to test swapping them and running the engine for a bit? My current wiring is in the attached picture.
Thanks!