|
I installed the rear Koni yellows which are firmer than the reds. I wasn't aware the reds were not oe fit. One minor tip - when I installed the rears, I tightened the upper nut before aligning the lower hole...it was an inch off so I just pushed it into place and put the bolt through. Now, every time I go over a small bump, the shock squeaks. I suspect its because I force aligned the bottom as opposed to positioning it corrrectly to begin with. I have to go back and loosen everything to eliminate the squeak (I hope).
__________________
'90 S2 Cabriolet
|