|
the FP's pull about 8 amps each. if the relays cant handle 8 amps, a smaller fuse will not help anything because you cant go lower than what the FP pulls.
splitting the fuses is a great idea for keeping the fuses cool.
I split mine and made it look factory.
the hard part is figuring out which wire to cut AT the FP relay.
I then ran the cut wire over to a spare fuse slot (bottom)
then ran a red wire from the top of the same source that feeds the factory fuse over to the new FP fuse.
I don't get this. they ran power from FP RLY 2 back to power the WUR, AAR and then back up to energize the O2 sensor relay. like there was not enough load on there already.
__________________
86 930 94kmiles [_ _] RUNNING: [__] NOT RUNNING: ____77 911S widebody: SOLD
88 BMW 325is 200K+ SOLD
03 BMW 330CI 220K:: [__] RUNNING: [__] NOT RUNNING:
01 suburban 330K:: [__] RUNNING: [__] NOT RUNNING:
RACE CAR:: sold
|