|
|
|
|
| Author |
|
|
Registered User
Join Date: Oct 2014
Posts: 1
|
1999 boxster, both window regulators failed over the summer. Motors were fine. I have changed the regulators, but there is no power at the switch for either window. I replaced the fuseD1 but still no power. I also replaced the light switch. Headlights are working fine again... not sure if there is anything connecting the two. Any ideas?
__________________ This post was auto-generated based upon a question asked on our tech article page here: |
||
10-20-2014, 09:06 AM
|
|
|
Moderator
Join Date: Jul 2012
Location: New England
Posts: 3,189
|
Power from D1 goes directly to the power window motors. Check if there is power there. If there is, try jumping terminal 2 to 4 on the left side swtich, use a fused jumper wire.
- Nick |
||
|
10-20-2014, 09:06 AM
|
|
