Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > European Car Forums > MINI Discussion Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered User
 
Join Date: Jun 2019
Posts: 1
Garage
No fuel pressure, no codes

I have a 2008 mini cooper base with no engine codes, it has a new timing set up and a fresh valve job. New crank sensor, Vanos solenoids, and fuel filter. After doing the timing chain replacement, the car started but only ran off idle, then it stopped running all together and there was no fuel pressure at the rail. I checked the fuel filter and ended up replacing it. I then noticed a bent valve so i pulled the head and after replacing 10 valves, I found a vacuum leak and replaced the hose. The car still has no fuel pressure yet I can hear the pump running and it has correct voltage.

Any help or advice would be greatly appreciated. My wife wants her parking spot back!!
Old 09-22-2019, 06:56 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply

Thread Tools
Rate This Thread
Rate This Thread:

 


All times are GMT -8. The time now is 03:36 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.