Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Miscellaneous and Off Topic Forums > Off Topic Discussions


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Non Compos Mentis
 
Join Date: May 2001
Location: Off the grid- Almost
Posts: 10,602
My partnership in the Bonanza worked well. Several times we were approched by someone wanting to buy a third, and while it would have been nice to reduce the bills a bit, we always decided to keep it just the two of us. I knew he treated the airplane well, and he knew I also treated it well. We never had scheduling conflicts. The more people involved, the less time available, and a greater chance of disagreements over maintenance issues.

If I were to build a homebuilt, I would probably go with one of the RV series, simply because if you go to any fly-in or show, there are more of them than anything else. That tells me that people actually complete the kits. The bugs should be worked out of the plans, and parts are easily available.

The other temptation would be a Falco. To my eyes, the prettiest plane on this planet.

Old 04-14-2005, 03:37 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #41 (permalink)
Registered
 
Danskman's Avatar
 
Join Date: Mar 2003
Location: Cameron Park (NorCal)
Posts: 779
Joe A

Do you have any comments regarding the much-discussed spin issues with the Tomahawk?
__________________
Mike

'80 911SC Weissach Edition
'87 325is
'02 K1200RS
Old 04-14-2005, 03:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #42 (permalink)
Senior Member
 
Join Date: Jun 2000
Location: N. Phoenix AZ USA
Posts: 28,967
Mike,

My feeling is that if you are going to take any airplane into anything other than straight and level flight, then you need to have chutes on and be ready to get out of the plane if needed.

The Tomahawk got a bad reputation because of the spin situation and it deserves part of it but then also the people putting the plane into the spin may not have been very experienced either. This airplane was built to compete in the pilot training market and was not really engineered to the point where it should have been. If you keep it in normal parameters I would not be afraid to fly it. Do spin training in something else, something designed for it.

Bottom line for me is that if you want to do anything other than normal flight, fly a Citabria like John has, wear a chute and remember that the airplane is expendable.

Dantilla,

Boy, agree with you about the Falco but talk about a time hog, it takes 5-7 years minimum to build as its a wooden bird and everything is hand built. Might buy one but only if I knew the builder and trusted him. Would get a RV in a heartbeat if I wanted a modern bird. They make a very nice airplane and its supported by the factory and forums very well.

JoeA
__________________
2021 Subaru Legacy, 2002 Dodge Ram 2500 Cummins (the workhorse), 1992 Jaguar XJ S-3 V-12 VDP (one of only 100 examples made), 1969 Jaguar XJ (been in the family since new), 1985 911 Targa backdated to 1973 RS specs with a 3.6 shoehorned in the back, 1959 Austin Healey Sprite (former SCCA H-Prod), 1995 BMW R1100RSL, 1971 & '72 BMW R75/5 "Toaster," Ural Tourist w/sidecar, 1949 Aeronca Sedan / QB
Old 04-14-2005, 04:09 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #43 (permalink)
Registered
 
930addict's Avatar
 
Join Date: Jan 2005
Posts: 902
Garage
This is a true story - we have it all on tape!

My brother was taking flying lessons up in Washington State. His friend, Micky, wanted to ride along. So my brother gets permission from the instructor and they all pile in the plane - my brother and the pilot up front and Micky in the back. So they get up to altitude and Micky's just sitting there enjoying the view and taping the flight with the video camera while the pilot instructs my brother. Unbeknownst to Micky, today they will be stalling the plane. So my brother pulls back on the yoke and cuts engine power to stall the plane. It starts to stall and on the video you can hear mickey yelling whoa whoa whoa! Then the plane begins tumbling towards the ground. At this point the video camera is clearly out of control and Micky is screaming uncontrolably until finally my brother regains control. Well Micky was quite ticked and was calling my brother every name in the book until my brother turned around - the camera still rolling - and casually asks, "That was pretty cool, huh?" Micky did not respond. Poor guy. I would have hated to be in his shoes- but it's pretty funny.
Old 04-14-2005, 07:47 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #44 (permalink)
Non Compos Mentis
 
Join Date: May 2001
Location: Off the grid- Almost
Posts: 10,602
I have done spins in a 150 Aerobat on several occasions. With a 150, if you simply let go of the controls, it recovers on its own. You have to intentionally hold it in a spin if you want to do several turns.

Old 04-15-2005, 07:05 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #45 (permalink)
Reply


 


All times are GMT -8. The time now is 09:54 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.