![]() |
The 9N in summer mode.
http://forums.pelicanparts.com/uploa...1226939125.jpg http://forums.pelicanparts.com/uploa...1226939165.jpg In winter mode. http://forums.pelicanparts.com/uploa...1226939198.jpg My current best weapon for plowing. (Last year I replaced the clunky lift winch on top of the rack shown with a nicer compact unit mounted just below the front bumper) http://forums.pelicanparts.com/uploa...1226939261.jpg |
The old tractors have a better cool factor. Like VIN said, I'd buy one just to have it.
|
I have an 8n that I work to death. It sits outside all year long and it starts every time....if its been a long time a little starting fluid never hurts.
Whatever model you are looking at or are thinking about buying, you really want to get the 4 speed forward transmission. If you can find one with the high/low box all the better. |
Jake,
Good idea, but a couple of observations: Plowing snow with a backblade can be a real pain in the back & neck. That said, it has been done by lots of folks. Get wheel chains and an top-edge extention for the blade to allow you to push the darn white stuff. If the tractor you get has a live PTO, a 3PH mounted snowblower is nice for getting the stuff back out of the way and helps reduce drifting. You'll find a real big difference between sitting in the Suzuki and being on top of the Ford. Visibility is great, wind protection is non-existant. Work on Mrs. NFN on the 'maintaining the cottage property' aspect. with cart, backblade and a length of chain you can accomplish a lot with one of the old suckers. Have fun. Les |
Who woulda thunk that Ford, Porsche and Lamborgini had something in common?
And as far as no heat? man you could take a heater core out of a junkyard car and mount it somewhere close to you! or just braze some copper tubing to the seat and you could get very warm. I would plumb it in before the thermostat to warm up faster |
My brother-in-law and sister live in the middle of nowhere, up high where there is plenty of snow. And hills. She drives an Audi Quattro. He's a retired diesel mechanic. He handles the snow plowing duties. He's got a 3/4T 4WD Camper Special Ford pickup with a big white propane tank behind the cab. It's about a 1970 or so. Rust holes everywhere. It doesn't go anywhere. It just plows. In the winter, the bed FILLS with snow. It's got a plow on the front and chains on all four tires. Split-rim wheels. Full of snow, it probably weighs three tons or so. I think the only strategy that would be more effective than this one would be a dozer. This solution is cheap, it would keep your regular car plow-free and it would plow better than those rubber-tired tractors.
|
Quote:
Quote:
Quote:
Quote:
Saving $$$ on plowing will be a big angle, but again - I would really have to prove that it could be tucked away neatly in the yard. She does not like "dogpatch". Quote:
Quote:
|
And as far as no heat? man you could take a heater core out of a junkyard car and mount it somewhere close to you! or just braze some copper tubing to the seat and you could get very warm. I would plumb it in before the thermostat to warm up faster
I wonder how hard it would be to rig up a little cab to use in the winter you use a large DOG HOUSE if your wife finds out that you bought it! |
Quote:
She'll be in negotiating mode within a week or so... her gears are turning as much as mine. She's probably trying to decide what the "trade" will be. |
Here is the box blade my dad uses, he takes the tines out for winter.
http://forums.pelicanparts.com/uploa...1227051379.jpg Have you been to this website? Tractor House Don't tell Mrs. Notfarnow I have passed along this information. I don't need to be on any ninja hitlist. |
I have a 1947 8N I purchased last year during the summer. It came with a 6' wide Woods Hard Core belly mower which is great for the yard and the pastures. I use a 6' wide blade on the 3 pt for snow removal. Last winter we were blessed with largest amount of snow ever recorded and there was only 1 time I had trouble getting the tractor through and that was when it was covered with a 5' tall drift. Other that I love my 8N and it has been pretty dependable. I hope I run as good when I am 61 years old. I payed $2400 for my tractor with the mower deck. The one you posted I would of picked up in heart beat at that price. Here is a video of Chitown944 taking my 8N for a ride in front of my house. He is a city slicker but loved the 8N regardless.
http://www.youtube.com/watch?v=VBh1QcDDi6o Speedy:) |
So...
Mrs Notfarnow knows that when I get something on my mind, I can really put on the hard sell. She knew it was coming. A few hints and jokes. I finally just laid it out, said how I thought it would save us in plowing, would be great at the cottage, would make me a better husband and father, etc etc. No way. No where. No how. Period. Exclamation mark. We have enough projects, enough vehicles, enough junk to maintain. But then I showed her a picture. This one. Let me tell you, she melted. Changed everything. "Oh it's CUTE. I thought you wanted an ugly boxy thing. That little guy is CUTE!" ha ha she's a good girl. |
Jake, never underestimate the cuteness factor when dealing with women.
|
Quote:
Speedy:) |
Yes it looks like a Ferg.
|
Quote:
|
Quote:
|
mmmmm
Plow, chains, rebuilt hydraulics, tow-behind mower, 12v. $2200 http://forums.pelicanparts.com/uploa...1233846113.jpg I really like the front-mount plow. think I'd jump on it if we weren't RIGHT in the middle of layoffs here |
that is a great deal for all it has.
|
Yeah, I've got cash in hand too, but I think I'd best wait a bit. Plus, I don't know where the hell I'd put it right now. Mrs Notfarnow says I have to get rid of a trailer before I bring ANYTHING home.
|
All times are GMT -8. The time now is 11:30 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website