Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Off Topic Discussions (http://forums.pelicanparts.com/off-topic-discussions/)
-   -   Spoons For Real Men (http://forums.pelicanparts.com/off-topic-discussions/578644-spoons-real-men.html)

tabs 12-05-2010 12:27 AM

Spoons For Real Men
 
These are Spoons for real men and not for any sissi mommas Boyz. These are Spoons that say Point Four Five on the Barrels and will make any dimestore desperados f@ggoty little balls shrink up.

From the top... is a Colt pre-series 70 National Match that was made from 1959 to 1970. It features a pair of Colt Medallion Pachmeyer wrap around ruber grips, high polish Colt charcoal bluing,and just the last of the best Colts 1911's with a rock solid slide and snap in the trigger pull. . In the middle is an Ed Brown Custom Executive Carry which is his version of the Commander. Bobtailed magazine housing, 28 lines per inch checkering on the grip straps, Trijcon Night Sights and smooth rock solid slide function. Bottom is a Detonics Combat Master which was the first of the compact 1911's. While it isn't quite the same caliber of workmanship and function of the Colt or Brown it is good enugh.

http://forums.pelicanparts.com/uploa...1291541233.jpg

http://forums.pelicanparts.com/uploa...1291541268.jpg

ODDJOB UNO 12-05-2010 03:18 AM

a man just cant own enough of these. considering how many rooms in an average house these days.

sc_rufctr 12-05-2010 03:31 AM

Quality stuff...

I like the "Ed Brown Custom" the best. That bob tailed magazine housing looks the business.

azasadny 12-05-2010 04:03 AM

Very nice!

Shuie 12-05-2010 05:46 AM

Detonics Combat Master....... cool :)

I know you know this, but don't run too much of the full power stuff through the GC. Or, at least swap the recoil spring out to a full power spring if it doesn't already have one. That rear site could shear off with the lite spring and 230gr stuff.

flatbutt 12-05-2010 06:29 AM

Nice. Is there a function to the bobtail?

Danimal16 12-05-2010 07:46 AM

agree on that 4 5 number! Love my Kimber and it has those numbers on it as well.

Joeaksa 12-05-2010 08:29 AM

Love the comment made when someone asked "why do you carry a .45 auto" and the reply was: "they do not make a .46 auto!"

tabs 12-05-2010 09:12 AM

Anybody that don't have a dozen or more of these things lying about just ain't a real Marine.

enzo1 12-05-2010 10:17 AM

I like the Colt-Nice!

Rick Lee 12-05-2010 10:36 AM

I love my 1911's, but they are too expensive to CCW. My latest loaded Springfield Champion is worth two of my SIG's.

mossguy 12-05-2010 10:38 AM

Too expensive to carry? I don't understand.

Tom

esample 12-05-2010 10:39 AM

Nice pieces.

How about a Wilson Combat .45? This is a rare gun that is the Supergrade version of the Professional. It's got a 4" bull barrel, checkering underneath the trigger guard, recessed & shortened slide stop, normal Supergrade serrations, Ed Brown Bobtail, all black on light weight frame, & full melt down.



http://forums.pelicanparts.com/uploa...1291577780.jpg


Sorry about the phone pic...

-e.

Rick Lee 12-05-2010 10:44 AM

Quote:

Originally Posted by mossguy (Post 5710206)
Too expensive to carry? I don't understand.

Tom

If you ever have to use it, you are gonna lose it. You might get it back a year or more later after it's been jumbled around in an evidence locker and been marked up by the ballistics lab. Since most 1911's are highly customized and not cheap, they are not the best for CCW. First and foremost because any customized gun is going to make you look like a gun nut in front of a DA and jury. There's a well known case in AZ where a guy, who very justifiably shot a nutbag attacking him in the woods, spent seven years in the can, largely because his carry piece was a 1911 10mm and the DA was able to pick a super gun-ignorant jury (Coconino County) that thought such an oddball caliber meant the shooter was a gun nut and looking for a fight. And since not many 1911's are super accurate out of the box, a lot of them require some customization. I'd rather have a near stock SIG or Glock, which pretty much grow on trees, are in use by countless police agencies, can easily be shown to be a common self-defense-type gun and don't cost much to replace.

mossguy 12-05-2010 10:50 AM

Thanks Rick.

Many good points that I was mostly not aware of, and just a few that I had forgotten. So I guess I should keep my LCP in my pocket and my 1911 for the range.

Best,
Tom

tabs 12-05-2010 12:16 PM

The Ed Brown is the only Commander sized custom whose slide travel equals the full sized version and is thus slightly more realiable. Ironically Brown says that all his spoons are equally accurate and the difference is in the cosmetics. He does give a slight push to the full sized units, but says it is negliable for all intents and purposes.

Brown also says he does outsourced work from other custom makers.

tabs 12-05-2010 12:42 PM

Another John Browning legacy. This was picked up yesterday for $499 plus shipping and receiving. It is a Browning HP (mdl 1935) made in Beligium from 1980 to 85. It is Hard Chromed version wt std Pachmeyer ruber grips. Me thinks it needs a good cleaning

http://forums.pelicanparts.com/uploa...1291585294.jpg

Jagshund 12-05-2010 12:57 PM

Doesn't matter how big they are if you can't hit anything. And my freaking ears have been ringing ever since forgetting to replant my hearing protection at the range last week- some dude had a cannon that'd put those .45s to shame. Unfortunately, I had the opportunity to hear what it sounded like in an enclosed space without muffs.

tabs 12-05-2010 01:30 PM

What anyone wants with anything beyond a 44 Mag is beyond me?

azasadny 12-05-2010 01:59 PM

One of my all-time favorites!
 
Quote:

Originally Posted by tabs (Post 5710387)
Another John Browning legacy. This was picked up yesterday for $499 plus shipping and receiving. It is a Browning HP (mdl 1935) made in Beligium from 1980 to 85. It is Hard Chromed version wt std Pachmeyer ruber grips. Me thinks it needs a good cleaning

http://forums.pelicanparts.com/uploa...1291585294.jpg

One of my all-time favorites!


All times are GMT -8. The time now is 07:20 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.