Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Off Topic Discussions (http://forums.pelicanparts.com/off-topic-discussions/)
-   -   My version of "Overhaulin" (http://forums.pelicanparts.com/off-topic-discussions/614835-my-version-overhaulin.html)

Racerbvd 06-20-2011 09:17 PM

Quote:

Originally Posted by cgarr (Post 6091220)
Is there any difference in the brakes besides the rear disk on the GTI? Do I need the complete cross axle or just pull the rear brakes and mounting plates? Front disks should be the same on both?

It has been a while, but I think they are slightly bigger, but it is easy to build that set on the bench while the car is still on the ground.. Axle should be the same, so you can just pull the brakes..

My old truck.
http://forums.pelicanparts.com/uploa...1308633334.jpg
http://forums.pelicanparts.com/uploa...1308633426.jpg

cgarr 06-27-2011 01:11 PM

I have been really focusing on the mechanical right now. I got the engine pretty much done except for a new o2 sensor. All new belts, timing belt and cam set correct, timing cover that was missing, water leaks fixed, fan temp sensor, relays, wiring fixed etc. Even go the AC working and blowin cooooold. Next is to pull the front suspension and replace all the rubber bushings, ball joints and tie rod ends, kind of tighten it up.

Maybe a little bling with the power coating of a few engine parts yet too!

http://i30.photobucket.com/albums/c3...1/DSC_0003.jpg

cgarr 07-06-2011 06:11 PM

I got the headliner glassed back up so its solid again and put in new padding, next is to glue back in the headliner.

Taking next week off to get the car ready for paint, hopefully paint it next weekend!
http://i30.photobucket.com/albums/c3...1/4e01d7d2.jpg

Getting it stripped down, I think I will leave the side glass in, I can run some cord inside the rubber to raise it away from the body for painting!

http://i30.photobucket.com/albums/c3...1/587ceed3.jpg

Tobra 07-06-2011 08:39 PM

check it out, GRM did one sort of like this
Volkswagen Golf: Project Cars: Grassroots Motorsports Magazine

cgarr 07-09-2011 11:00 AM

Painting the off the car parts: Bumpers go some bulldog adhesion promoter:

http://i30.photobucket.com/albums/c3...1/9881addc.jpg
http://i30.photobucket.com/albums/c3...1/ab5cc441.jpg

azasadny 07-09-2011 12:38 PM

Very nice...

Mrmerlin 07-09-2011 01:16 PM

not sure where you at with the project but it would be a great idea to remove the interior as much as possible prior to painting,
everything will have a layer of red and clear on it

cgarr 07-10-2011 03:34 PM

Its ready for paint this Wednesday if I get the shop cleaned up!

http://i30.photobucket.com/albums/c3...1/cc1d8133.jpg

crustychief 07-10-2011 05:33 PM

That is really looking good!

cgarr 07-12-2011 05:05 PM

On its way to our paint shop, should be a perfect day for painting tomorrow!

http://i30.photobucket.com/albums/c3...1/54c8e2ba.jpg

enzo1 07-12-2011 06:40 PM

can't wait to see it.... great thread...

cgarr 07-13-2011 01:43 PM

Its all red again! Didnt turn out too bad but I think I will color sand it and buff it out since I have the time:

http://i30.photobucket.com/albums/c3...1/79876f24.jpg
http://i30.photobucket.com/albums/c3...1/1c741882.jpg

azasadny 07-13-2011 02:33 PM

Very nice!!!

mikeferg75 07-13-2011 02:33 PM

Cool!

David McLaughlin 07-13-2011 02:51 PM

Great job! My A2 Golf GT (couldn't afford the i) was my favorite. This project is looking very nice.

MBAtarga 07-13-2011 04:02 PM

Quote:

Originally Posted by cgarr (Post 6133943)

Didn't notice until this picture - the shade of red - how close is that color to guards red? That's the stock VW color?

cgarr 07-13-2011 04:35 PM

Its a stock VW color used for a lot of years, its Tornado Red.

Tim Hancock 07-13-2011 05:01 PM

Nice Craig!!!! You work fast. What kind of paint did you use? Nearly every car I have ever painted has at least a touch of orange peel... Wet sanding and buffing sucks, only you can decide whether it needs it or not.

cgarr 07-13-2011 05:07 PM

I want to get the over spray and some orange peel, it was hot today, off the surface so some 1500 and a good compound should do it. I have found that if you get it within the first 48 hours its a heck of a lot easier to buff out!

Roby466 07-14-2011 02:20 PM

Nice work and nice gift!!


All times are GMT -8. The time now is 09:38 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.