Campy part needed

[greglepore]

I have a pair of Record 10 spd levers that were retrofitted for 9 a long time ago, I now want to return them to 10spd.

I need either the internal 10 spd cam -right side only-(they're all the same across yrs/groups) or a trashed right lever.

Not looking for charity necessarily, just parts...

[sc_rufctr]

Easy part to order from Campy. Your local Campy stocking bike store should have no problems.

I recently converted 8 speed bar end shifters to 10 speed.

[greglepore]

They are available-50 bucks plus shipping, was hoping to buy a trashed lever for less.

[sc_rufctr]

$50???

I paid about $25, 18 months ago.

[Joe Bob]

You can buy used in good shape shifters for that on FleaBay.

[greglepore]

yes, the bar end cams are cheap. The ergo cam is anywhere betwen 50-85, depending on the vendor. Itts why I'm looking for trashed levers, all the small parts are dumb expensive-the g springs 12 bucks apiece, the coil spring and cam carrier like 25...and they all wear eventually.

Nothing on ebay at the moment.