Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Off Topic Discussions (http://forums.pelicanparts.com/off-topic-discussions/)
-   -   Anyone in Houston interested in Sunday range session? (http://forums.pelicanparts.com/off-topic-discussions/794400-anyone-houston-interested-sunday-range-session.html)

Hads930 01-31-2014 06:29 AM

Anyone in Houston interested in Sunday range session?
 
Plan on going to the range in Katy/Bush Park on Sunday morning. They open at 8 and weather permitting I will be there near opening time. I am trying to get a new rifle dialed in. May take a hand gun that I have never shot if I can get my wife to go also.

BRPORSCHE 01-31-2014 06:36 AM

I am always down for a range day. What distance will you be shooting?

here is my 700 CDL in 8x57 Mauser
http://forums.pelicanparts.com/uploa...1391182568.jpg

Hads930 01-31-2014 06:37 AM

Still screwing around at 100, if I can get it good at 100 will move to 200.

BRPORSCHE 01-31-2014 06:46 AM

Have you ever shot sporting clays there? I have always wanted to do it.

emcon5 01-31-2014 06:56 AM

Quote:

Originally Posted by Hads930 (Post 7885442)
Plan on going to the range in Katy/Bush Park on Sunday morning. They open at 8 and weather permitting I will be there near opening time. I am trying to get a new rifle dialed in. May take a hand gun that I have never shot if I can get my wife to go also.

If you go to the range on Sunday, you are supposed to go in the afternoon. Events elsewhere will keep the morons away.

emcon5 01-31-2014 07:33 AM

Quote:

Originally Posted by BRPORSCHE (Post 7885457)
I am always down for a range day. What distance will you be shooting?

here is my 700 CDL in 8x57 Mauser

Do you reload? If not, wanna sell your brass?

Also, if not, you should. Commercial offerings in 8mm Mauser suck in this country, in case some dullard puts one in a Gewehr 88 rifle with a .318 bore.

If you look on Privi Partisan's web site, they list 2 different calibers, "8 x 57 IS" which is the CIP designation for the 8mm Mauser round, and "8mm Mauser" which is the SAMMI designation, with much lower pressure. The same bullets are ~2-300FPS slower in the "8mm Mauser" vs the "8 x 57 IS".

Privi's 175 gr "8mm Mauser" @ 2330 fps is fairly close to Remington's and Winchester's only offerings, 170 gr @ 2360fps. Federal's only option is even wimpier 170gr @ 2250 FPS.

Privi's 175 gr "8 x 57 IS" is 2540fps.

Hornady seems to be the only folks making "real" 8x57 ammo, with two options, a 195 hunting bullet and a 196 gr match, both @ 2500 FPS, which is pretty close to the original military load.

Even the pussified US loads are still enough to kill pretty much anything in the lower 48, but it irritates me.

BRPORSCHE 01-31-2014 08:23 AM

Emcon,

Thanks for that. The domestic offerings are definitely low power, but when I am shooting 60-80 rounds at the range in an afternoon I don't want my shoulder to turn to mush.

Where are you buying your Privi? I am a big fan of the match cartridge that they make. Also, where do you get your S&B?

Sorry Hads for the hijack. I'll PM you my cell #.

porsche4life 01-31-2014 09:18 AM

Be careful wolfie, some redneck might mistake you for a squatch and open fire! ;)

emcon5 01-31-2014 09:25 AM

Quote:

Originally Posted by BRPORSCHE (Post 7885661)
Emcon,

Thanks for that. The domestic offerings are definitely low power, but when I am shooting 60-80 rounds at the range in an afternoon I don't want my shoulder to turn to mush.

Where are you buying your Privi? I am a big fan of the match cartridge that they make. Also, where do you get your S&B?

I picked up a couple boxes at my local Cabela's, they carry the S&B as well, but I haven't tried it. The S&B is supposed to be good stuff, loaded to original military specs, 196gr @ 2591 fps.

My 8mm Mausers are both WW2 K98s, and I primarily shoot surplus through them, or handloads. Neither of my K98ks like the Privi stuff, so if I buy more it will be to get the brass.

The best price I remember seeing on Privi is from SGAmmo, in Oklahoma, but they are out of stock at the moment. They do have the Hornady Vintage Match in stock though. One state over for you, shipping shouldn't be all that bad. 8mm Mauser | SGAmmo.com

I was serious about buying your brass, by the way. Good cheap surplus 8mm ammo has pretty much dried up, and I can always use them.

mattdavis11 01-31-2014 09:39 AM

Quote:

Originally Posted by BRPORSCHE (Post 7885457)
I am always down for a range day. What distance will you be shooting?

here is my 700 CDL in 8x57 Mauser
http://forums.pelicanparts.com/uploa...1391182568.jpg

That's a lot of damn ammunition to figure out if you can shoot or the gun is worthless.

Jebus, I don't think I've ever run through a box to sight one in. Inch high at a hundred, then leave it alone.

BRPORSCHE 01-31-2014 09:54 AM

Matt,

What isn't in this picture are two other rifles in 8x57 Mauser. I wasn't shooting to sight in my rifle. I was shooting to hear the sound of freedom.

I don't golf so that's how I justify the expense. Plus, it's not really that expensive.

mattdavis11 01-31-2014 10:06 AM

Does the gub need additional bore wear? I'm not anti, I love my spoons, but I'm not eager to chamber a round either. Golf is too expensive, I'm lucky to have two balls when I finish a round.

emcon5 01-31-2014 11:21 AM

Quote:

Originally Posted by mattdavis11 (Post 7885847)
Does the gun need additional bore wear?

Yes. Takes a LOT of rounds to shoot out a bore.

Hads930 01-31-2014 04:51 PM

Hey Tom sounds good. I PM'ed you my cell, let me know what time you think you'll get out there.

Hads930 01-31-2014 04:53 PM

And your PM box is full.

BRPORSCHE 01-31-2014 04:57 PM

Crap. Let me empty it now.

Hads930 02-01-2014 09:14 AM

Tom sent you a PM

mattdavis11 02-01-2014 09:31 AM

Quote:

Originally Posted by emcon5 (Post 7885951)
Yes. Takes a LOT of rounds to shoot out a bore.

Doesn't take much to warp a barrel.

emcon5 02-01-2014 11:43 AM

Quote:

Originally Posted by mattdavis11 (Post 7887246)
Doesn't take much to warp a barrel.

http://forums.pelicanparts.com/uploa...1391287379.jpg

emcon5 02-02-2014 04:55 PM

Quote:

Originally Posted by emcon5 (Post 7885504)
If you go to the range on Sunday, you are supposed to go in the afternoon. Events elsewhere will keep the morons away.

Seems I was right, I went to the county range just after lunch, and there was only one other small group there and they left after about an hour. After that, I was the only one there.


All times are GMT -8. The time now is 03:10 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.