They are two different thicknesses to compensate for the offset of the Design 90 rims, since the rims are two different widths (front/rear).

If I drive back to the warehouse today, I will measure the thicknesses of each.

The under-decklid Air conditioning condenser coil from a 70 or 72 Porsche 911, is GONE now - as is also a set of targa top sheet metal forms.

It could be yours!!
I have a spare projection unit, spare transformer, and spare observation screen.

You can have it all. All you have to do is come get it. :D

cool. Thanks.

Sorry for the delay on this.

The thin spacers are 1"
The thick spacers are 1.5"

Sorry for taking so long with this.

Here is what I have in used 2" camloc items:

4 - 2" camloc plugs, plastic
4 - 2" camloc caps, plastic
1 - 2" internal camloc to internal camloc union, stainless
1 - 2" external camloc to external camloc union, stainless
1 - Banjo valve with 2" stainless camloc fitting attached

These items will fit in a large USPS flat rate box and ship for ~ $20


As for e-track straps, I have 4. They are new, never used, and I gave about $20 each for them.

Shipping on these is $13.50.


Let me know.




******


Targa rear window is now gone to the landfill.

Got the refueling probe. It is a work of art.

Thanks!

Sir, PM sent.

The two I have left are these. One has scratches on the tip. One has scratches around the body.
Left assembled in 97. Right assembled in 91.

http://forums.pelicanparts.com/uploa...1477496391.jpg

Unfortunately too thick for my application by twice. Many thanks for checking.
-C

One on left please. PM sent with data needed.

Will Do! http://forums.pelicanparts.com/support/smileys/wat6.gif

I will take the one on the right!!

Awesome piece!

Ok... ! PM sent.

Everyone else, you're SOL. That was the last one!

More treasures from the warehouse...
All the new parts were bought from Pelican, so I don't feel bad about listing them here.


23 brand new CV bolts. pn 900-067-211-09 ~ $1.50 each
$30, shipping included (US only)

http://forums.pelicanparts.com/uploa...1477576777.jpg


*****

Other stuff:

Sump plate gaskets. Pelican price $3.75 ea
http://forums.pelicanparts.com/uploa...1477577009.jpg

Cooling fan belt. This one is 10x710, so check your application before saysing 'yes'. Priority mail shipping will be ~ $6.80 (US only)
http://forums.pelicanparts.com/uploa...1477577085.jpg

These things.
http://forums.pelicanparts.com/uploa...1477577318.jpg

Axle joint gaskets. Part #: 923-332-297-00-M30
Set of 4. Pelican price is $2.25 each.
Priority mail shipping will be ~ $6.80 (US only). Unless you want to combine them with the CV bolts.
http://forums.pelicanparts.com/uploa...1477577547.jpg

This stuff.
I think the small bits are left over from a 1972 that I was working on. Hell, it's been about 10 years ago, so there may be Fiat parts in there also.
All of it is well used or worn, except that main seal which is brand new.

http://forums.pelicanparts.com/uploa...1477577719.jpg


***

This stuff.
The green pack, and the two packs on the far right, are shims for the center bearing of a 915 transmission. The rest is gaskets, seals, and misc for a 3.0 engine. All new.

http://forums.pelicanparts.com/uploa...1477577829.jpg


And these appear to be valve stem seals, valve cover hardware, and etc.
http://forums.pelicanparts.com/uploa...1477577876.jpg



This is what it costs to ship stuff:
https://www.usps.com/ship/priority-mail.htm

Ok... somebody called dibs on the center caps in this box.

I think the T handles are the trunk and hood pulls from a longhood car.

http://forums.pelicanparts.com/uploa...1477577719.jpg

A few more small bits.
The "C" is smooshed. All are oxidized.

http://forums.pelicanparts.com/uploa...1477592791.jpg

I guess I should let them go cheap since it is mis-spelled.

Refueling nozzles are now all gone.

Tube tester and tubes are gone.

How much for the red telephone? I'm only half joking.