912 Project

[JesseA]

I have been working my a** of in the garage the last week. Scraped the whole interior to bare metal using a heat gun.

http://img69.imageshack.us/img69/4096/dsc05638n.th.jpg

http://img21.imageshack.us/img21/2261/dsc05635ae.th.jpg

To get the surface really clean will be grinding the last paint/body off using a scotch brite disc.

Does Würth´s Alu zink weld through primer give good protection? I will be welding in the floor pans in a week or so and would like to coat the bare metal so it doesn´t get infected..

How do I proceed after that? Im going for a factory look..

I had planned to go

1) Bare metal
2) Würth alu zink
3) Epoxy primer
4) Body

Should I skip the alu zink? Does the epoxy primer have any effect if it´s applied on the alu zink?

Any suggestions? I live in Sweden so I´m trying to get it as rust proof as possible.

[Fishcop]

Hi Jesse

Definitely use the wurth in areas you won't be able to get to after welding. Otherwise just clean up the metal well prior to laying the epoxy.