Thank you. I’m undecided but definitely leaning more towards this being exclusive to our builds. This guy is paying the price and I want him to have unique features that don’t just turn up randomly on other hotrods. At the same time it would be thrilling to see more of them on other cool builds.

^^^ Let them be exclusive for a couple years. Then share the artwork with the rest of us.


Sent from my iPhone using Tapatalk

Something like that could work.

This post starts with a pile and ends with a pile. It’s a bit sad to see so much work go in the trash however we now have the mold and it did great. The bumper is super light and beautiful quality. Couldn’t be happier.

http://forums.pelicanparts.com/uploa...1615259152.jpg
http://forums.pelicanparts.com/uploa...1615259152.jpg
http://forums.pelicanparts.com/uploa...1615259152.jpghttp://forums.pelicanparts.com/uploa...1615259333.jpg
http://forums.pelicanparts.com/uploa...1615259333.jpghttp://forums.pelicanparts.com/uploa...1615259438.jpghttp://forums.pelicanparts.com/uploa...1615259532.jpg
http://forums.pelicanparts.com/uploa...1615259532.jpg
http://forums.pelicanparts.com/uploa...1615259837.jpghttp://forums.pelicanparts.com/uploa...1615259532.jpg

Now break the mold! :D

No don’t break it! I like that. How much?!

Thank you. Sorry definitely not selling yet will consider in the future but definitely not now.

Super nice bumper man!

That is a really cool looking bumper there. Wow!

I already respected your ability and builds, but that's next level.

You make it look easy. Kudos!

Not only is Nathan a great guy .... he's an amazing craftsman !!
Cheers
Steve

The only sad part is all that beautiful Kevlar and carbon are going to be forever hidden and nobody (save for us) will ever see how precise and pretty the layup I’m and raw finish are.

Bravo, man- this is phenomenal work!

Great project, I'll be watching to see the power plant installed.

Very nice! ��

Nice work! These center lock wheels would look killer on that car http://forums.pelicanparts.com/uploa...1615313408.jpg

Nathan, that is a Very nice looking bumper. Well done !!

Those look like AWC's !!!
VERY nice ...

Steve

Thanks to all for the compliments. I am thrilled that you guys approve.

I couldn’t agree more. I already have my wheels but it’s not out of the question

Yes they are. Dan does a nice job.

Those are Sweet

Rear bumper is off to the presses

http://forums.pelicanparts.com/uploa...1615941171.jpg
http://forums.pelicanparts.com/uploa...1615941171.jpg
http://forums.pelicanparts.com/uploa...1615941171.jpg
http://forums.pelicanparts.com/uploa...1615941171.jpg
http://forums.pelicanparts.com/uploa...1615941171.jpg
http://forums.pelicanparts.com/uploa...1615941171.jpg

This stage is visually my favorite

http://forums.pelicanparts.com/uploa...1616034201.jpg
http://forums.pelicanparts.com/uploa...1616034201.jpg

Rear bumper and rest of the car look amazing.
You'll sell some of these for sure.

yeah that is what typically happens in F1 races were they have to yellow flag the race and sweep up all the tiny bits of chards. :)

carbon fiber is not necessarily stronger than than some of the higher S grades fiberglass, but its extremely high in modulus (stiffness) which makes it great for body panels. its relatively poor for impact absorption in a bumper application.

carbon often mix with Aramid fibers better known as its trade name Kevlar, is immensely strong in tensile strength (used in bulletproof vest) but lacks the modules of carbon.

the laid up both complementary materials together and bag it to remove the excess matrix (resin or epoxy) , the results can be exceptional like this bumper would be.

Had me sweating there lol. Thank you for your contribution.

Just about done with the rear bumper now on to the headlamp trim ring

http://forums.pelicanparts.com/uploa...1616463385.jpghttp://forums.pelicanparts.com/uploa...1616463169.jpg
http://forums.pelicanparts.com/uploa...1616463169.jpg
http://forums.pelicanparts.com/uploa...1616463169.jpg
http://forums.pelicanparts.com/uploa...1616463169.jpghttp://forums.pelicanparts.com/uploa...1616463557.jpg

Headlamp ring done and ready for next step. We are still a bit torn between making one out of brass or carbon. Both would require plating.

http://forums.pelicanparts.com/uploa...1616463707.jpg
http://forums.pelicanparts.com/uploa...1616463707.jpg
http://forums.pelicanparts.com/uploa...1616463707.jpg
http://forums.pelicanparts.com/uploa...1616463707.jpg
http://forums.pelicanparts.com/uploa...1616463707.jpg
http://forums.pelicanparts.com/uploa...1616463707.jpg

I hate the internet because it makes me realize how many people out there have so much more talent than I do.

Kudos, again.

Please don’t measure yourself against some of what you see. I have a dream team of fabricators, composite expert, paint, etc. it’s taken each of my teammates literally decades of hard work to get to their skill levels. With that being said they are no different than you, they’ve just put it that time.

well, they don't have "two left hands" as we say in Germany.

Can't wait to see the outcome for that lightweight headlamp ring.

Well that would be a slight problem lol. The ring was not part of a weight reduction, it was necessary due to the fact that the headlamp angle was changed approx 15-18 degrees

Great perspective, nothing beats experience and dedication to a craft.

I just fired a contractor that kept saying to me: "you won't see that when we're finished"

We just finished a 3 year, nightmare remodel on a new to us home where I discovered every single ****ty, crook contractor for 100 mile radius. Makes me want to go into residential construction as I noticed quite often I was paying more money than I was earning in the same span of time and what I was doing was much more technical

Rear bumper is now finished. Just need to finish bumperettes and it’s done

http://forums.pelicanparts.com/uploa...1616639838.jpg http://forums.pelicanparts.com/uploa...1616650600.jpghttp://forums.pelicanparts.com/uploa...1616639964.jpghttp://forums.pelicanparts.com/uploa...1616639838.jpg

pretty damn amazing!

Now on to the bumperettes

http://forums.pelicanparts.com/uploa...1617254576.jpg
http://forums.pelicanparts.com/uploa...1617254576.jpg
http://forums.pelicanparts.com/uploa...1617254576.jpg
http://forums.pelicanparts.com/uploa...1617254576.jpg

Progress photos on headlamp bezel and bumperettes

http://forums.pelicanparts.com/uploa...1617760453.jpg
http://forums.pelicanparts.com/uploa...1617760453.jpg
http://forums.pelicanparts.com/uploa...1617760453.jpg
http://forums.pelicanparts.com/uploa...1617760453.jpghttp://forums.pelicanparts.com/uploa...1617760453.jpg
http://forums.pelicanparts.com/uploa...1617760453.jpg

cool.

We are going to give pressing the headlamp ring out of brass a go but if that doesn’t work we will get the carbon rings as pictured above chrome plated at $300 each!!!