Sway bar bushing

[BeeMaster]

Hi I need help, I have a 76 911s, I am trying to re assemble my rear sway bar. I have the snap on end links. I can not get the white snap on bushing in the metal 45 degree metal link that goes to the bar. My press just squishes it. Any ideas thanks

[Tony V]

I’ve heated mine in boiling water and greased them before using a vise to press them in.
A good sized pry bar is handy in snapping it back on to the ball. Don’t over grease the ball or white bushing.

[BeeMaster]

My father spun up the press/punch on the right and that helped a lot getting them in. He put in his quil/mill and applied pressure then it would try to cock and he wiggle and tap but they are in now.

[bkreigsr]

cut down broom handle inserted between the tire and fender and a 4 lb hammer
You realize the links are sided- right & left.