![]() |
|
|
|
Registered
Join Date: May 2002
Location: Indiana
Posts: 4,553
|
![]()
I have decided to manufacture a 3.2 badge in the style of the 2.4 and 2.7 badges on the early cars. I don't think anyone makes these and I thought it would be cool for an early car with a transplant.
I will keep you guys updated on my progress. I am not going to mass produce these but, I had it drawn up on Unigraphics and have a .prt file if anyone wants it. It could easily be modified to say 3.6 (Are you listening Jack Olsen?) ![]()
__________________
Keeper of the Titanium Monkey 1975 911S (sold) 1973 911 w/3.2 (sold) 1983 911SC targa (sold) Looking for a 987.2 or 981 Cayman |
||
![]() |
|
Registered
Join Date: Feb 2002
Location: DTX
Posts: 2,409
|
Sweet. Definitely keep us posted.
__________________
89 Carrera 3.4 "There is a right way to go around a corner - it's called the line." -- PCA DE speaker bryteside.com - good things happen. |
||
![]() |
|
Green Skull 006
Join Date: May 2002
Location: Rhode Island
Posts: 2,040
|
Shawn
If you are going to make up a few, I'll buy one.
__________________
S Reg 823 R Gruppe 246 1955 pre-A Carrera Speedster...x 1974 leichtbau..."Sascha" "It makes me sad. Our cars were meant to be driven, not polished" - Ferry Porsche while surveying a PCA Parade concours field. |
||
![]() |
|
Registered
Join Date: May 2002
Location: Indiana
Posts: 4,553
|
The badge will be a replica of this one.
__________________
Keeper of the Titanium Monkey 1975 911S (sold) 1973 911 w/3.2 (sold) 1983 911SC targa (sold) Looking for a 987.2 or 981 Cayman |
||
![]() |
|
Non Compos Mentis
Join Date: May 2001
Location: Off the grid- Almost
Posts: 10,597
|
That would look great on the back of my '73. Count me in.
|
||
![]() |
|
Registered
Join Date: Apr 2002
Location: NoCal
Posts: 2,416
|
Shawn,
How are you going to manufacture them? I have been thinking about CNC machining a 2.5 badge (1 part = expensive!) for my car, but haven't gotten around to it yet. I assuming that since you used Unigraphics and .prt file in the same sentence, you are thinking CNC also. Would a small casting, like a jewler would do, be possible? Keep us posted. Jim '72 911T |
||
![]() |
|
![]() |
Registered
Join Date: May 2002
Location: Indiana
Posts: 4,553
|
We are doing these out of stainless on a CNC machine. Sand blast the background then polish the numbers. Probably come in on a Saturday and run them. I don't know how many we will make. But if someone has access to a cnc mill I can write up a program. Or send the .prt file. Like I said I don't want to go into buisness making these but I can send the file to anyone that wants it. If I don't get a huge response I will try to make enough for anyone interested. I was thinking around five or so.
__________________
Keeper of the Titanium Monkey 1975 911S (sold) 1973 911 w/3.2 (sold) 1983 911SC targa (sold) Looking for a 987.2 or 981 Cayman |
||
![]() |
|
Administrator
Join Date: Feb 2000
Location: Los Angeles
Posts: 13,333
|
There's a guy in R Gruppe who did this by having a jewelry maker make it.
If you can find an inexpensive way to do it, I think there'd be a small but reliable market for them. I'd be interested in one, probably. Or two. Or... well, I've got a lot of tails. ![]()
__________________
Jack Olsen 1972 911 My new video about my garage. • A video from German TV about my 911 |
||
![]() |
|
Registered
|
I've replicated parts using RTV silicone molds and pouring Antimony, Tin and/or Lead. Pewter is also possible but I haven't gone that route yet. A relatively inexpensive mold can produce about 100 quality pieces when using a decent Silicone compound. Pliability of the item can be influenced by the mix of different metals. The CNC / stainless approach is top notch though.
Last edited by RickM; 01-07-2003 at 11:12 AM.. |
||
![]() |
|
Too big to fail
|
How about a 3.6 version? Or at least a sticker, kinda like what Jack has.
__________________
"You go to the track with the Porsche you have, not the Porsche you wish you had." '03 E46 M3 '57 356A Various VWs |
||
![]() |
|
Registered
Join Date: Dec 1999
Location: USA
Posts: 761
|
Shawn,
Count me in for at least one. Keep us posted.
__________________
Eddie |
||
![]() |
|
Crusty Conservative
|
I've a friend, who happens to be a jeweler, ring designer-type, make a 3.2 for my 73's rear deck grille out of silver. Easiest to work with, I think I spent $55 for the whole deal. I took him a 2.4 badge, and he mimic'd the font style pretty well.
When I next get the car out of the garage I will take a picture & post it here... ![]() ps: What I would really like to see, maybe Wayne could find a source for the old back window decal of the engine outline with the displacement script. Some years back, the old Automotion had in stock replicas of this for every displacement up to 3.2 or maybe 3.4... I think one could selll a LOT of those? Even do differing outlines for webers, mfi, cis, dme, motronic, TURBO, Twin Turbo!!!!!
__________________
Bill 69 911 T Targa, 2.4E w/carbs (1985-2001) 70 911 S Coupe, 2nd owner (1989- 2015) 73 911 T Targa, 3.2 Motronic (2001- ) |
||
![]() |
|
Registered
|
Bill,
Perhaps one could design on their PC and print onto Decal Paper. I think I have some at home and it was pretty inexpensive. I believe color works a well. Rick |
||
![]() |
|
Registered
Join Date: May 2002
Location: Indiana
Posts: 4,553
|
Thom,
I probably won't do a 3.6 badge. But I can draw it up in Unigraphics and write a CNC program for it if you know any machinists out that way...
__________________
Keeper of the Titanium Monkey 1975 911S (sold) 1973 911 w/3.2 (sold) 1983 911SC targa (sold) Looking for a 987.2 or 981 Cayman |
||
![]() |
|
Too big to fail
|
Hey, that would be cool - I just happen to know a local fab shop with a CNC!
Thanks! Quote:
__________________
"You go to the track with the Porsche you have, not the Porsche you wish you had." '03 E46 M3 '57 356A Various VWs |
||
![]() |
|
Registered
Join Date: Sep 1999
Location: San Diego
Posts: 3,841
|
I've always wanted one that said "2.0/4"
If the time on the machine is the costly part, and not the individualized programs, would it be possible to make various badges?
__________________
Remember our friends: Warren, Ron, Grady, and Steve. 76 912E RS (i.e. "Real Slow"); 63 Volvo P1800 "S"; 71 Jaguar XJ6 Series 1; 05 GT3; 23 Cayman GTS 4.0; 97 Boxster |
||
![]() |
|
Administrator
Join Date: Feb 2000
Location: Los Angeles
Posts: 13,333
|
This is the decal alternative.
![]()
__________________
Jack Olsen 1972 911 My new video about my garage. • A video from German TV about my 911 |
||
![]() |
|
Registered
|
Shawn:
I'm in for one if you can make enough. Thanks for the effort. Cheers.
__________________
'94 CMC Firebird Trans Am '86 951 LS1 (C-2) Gone ![]() ![]() '77 911 3.2 (C-1) Gone but not forgotten. http://www.pelicanparts.com/MotorCity/marcesq1 http://www.youtube.com/user/958Fan#p/u |
||
![]() |
|
Crusty Conservative
|
Jack,
Yes, That's the one!!! Did you make it, or purchase? Tell us the story, I am interested. RickM, I am the WRONG guy to do the artwork, trust me ![]() ![]()
__________________
Bill 69 911 T Targa, 2.4E w/carbs (1985-2001) 70 911 S Coupe, 2nd owner (1989- 2015) 73 911 T Targa, 3.2 Motronic (2001- ) |
||
![]() |
|
Registered
Join Date: Jan 2001
Location: Kirkland, Washington
Posts: 1,095
|
Sign me up for one to give to vy friend Volney in the SF Bay area. -Surprise Vol - when's your birthday?
__________________
Jamie79SC |
||
![]() |
|