P/N help with clutch lever seals.

[lendaddy]

I need the two seals shown in this pic. Anyone know the P/N's? Thanks alot.

[lendaddy]

another bumparino

[derek murray]

this is all i could find that "closely" resembles your illustration... it lists two #4's [4 and (4)] for the 930 and does not show the lower seal in the schematic...

[lendaddy]

Thanks alot,

I wonder what the difference is between 4 and (4)?

[derek murray]

... further to the above, the schematic below is what actually appears for a '77 930... and the sealing ring (#4) is 915.301.139.00.... confusing?

[WERK I]

lendaddy,
The part # is 930-301-140-00 if your vehicle vintage is 1978-1988. Looking at the seals, they are differant from the ones that were on the throw-out lever originally. The new ones are non-directional.
Now if you can tell me the part# for the o-rings illustrated in your book as item #19, I would be very grateful.

[ChrisBennet]

Originally posted by WERK-I
lendaddy,
The part # is 930-301-140-00 if your vehicle vintage is 1978-1988. Looking at the seals, they are differant from the ones that were on the throw-out lever originally. The new ones are non-directional.
Now if you can tell me the part# for the o-rings illustrated in your book as item #19, I would be very grateful.

That PET lists that o-ring (19a) as "999 701 209 00 Carrera"
-Chris

[WERK I]

thanks chris,