|
|
|
|
| Author |
|
|
Registered
Join Date: Jun 2009
Posts: 1,244
|
center locking hubs
Gentlemen, I have turbo arms on the back of an 85 Carrera track car with center locking hubs. Attempting to set the bearing crush for the hubs. I have a puller that ordinarily would extract the conventional hub, but the CL hub extends an additional 4-5 inches and that exceeds my tools reach. I can modify this tool but thought I would find out what others have done for this job. I appreciate any good input. Thanks, Bob
|
||
11-30-2020, 10:06 AM
|
|
