|
|
|
|
| Author |
|
|
Now in Florida !
Join Date: Aug 2012
Location: York Beach, Maine and Anastasia Island, Florida
Posts: 409
|
Radio delete plate with gauge holes
I looking for a radio delete plate with 52mm gauges holes. Is anyone aware of one that is commercially available?
__________________
1983 911SC Coupe Hot Rod - Platinum - Twin plugged 3.4, DC-60 cams, PMO 50's, 1 3/4 headers, Bill Rader 915 w/LSD 1976 914 2.0 Lime Green Metallic - Completely stock |
||
04-29-2021, 06:58 AM
|
|
|
Registered
Join Date: May 2012
Location: Troy, Mi
Posts: 1,937
|
Search DIN gauge panel at your favorite retailer's website.
__________________
Matt - 84 Carrera |
||
|
04-29-2021, 08:10 AM
|
|
|
Registered
Join Date: Feb 2013
Location: Winnipeg, Manitoba
Posts: 415
|
Do it yourself, very easy. I got the radio delete from our host and used a hole saw to cut the hole for the gauge. 52mm is roughly 2.04" so a 2" hole saw works fine. PS, car isn't running, that's why the gauge is only reading around 12 volts.
 
__________________
1988 Carrera coupe 1966 250 Ducati 2015 VW Golf TDI gone because Dieselgate! 2021 VW Golf TSI 2014 Ninja 300 |
||
|
04-29-2021, 08:33 PM
|
|
|
Registered
Join Date: Apr 2020
Location: SoCal
Posts: 256
|
I toyed with making one for the early style dash to put gauges in place of a radio. I got a nice working prototype but never did anything with it and never covered the dash piece.
  Sent from my SM-G991U using Tapatalk |
||
|
04-29-2021, 11:21 PM
|
|
