![]() |
|
|
|
Easily Confused
Join Date: Feb 2005
Location: Republic of Texas
Posts: 429
|
Part ID help
Looking for some help on where these go. I can’t recall and didn’t document this part well.
Thanks in advance for the help! ![]()
__________________
Scott C. '08 Cayenne GTS 6MT : '89 Targa GP White/Black - "Oliver's Car" : '11 Mitsu Evo X : '08 Lexus IS350 F-Sport : '01 Toyota Sequoia : 1998 Yamaha V-max : 1979 BMW R65 |
||
![]() |
|
Registered
Join Date: Aug 2018
Location: San Diego, CA
Posts: 1,298
|
Spacer on top of front struts for US height?
Edit, nope not thick enough. Probably the washers for the top of the rear shocks, or maybe trans mount washers. Last edited by Solamar; 11-18-2021 at 05:47 PM.. |
||
![]() |
|
Uncertifiable!!!
|
Yep, top of rear shocks.
Johan
__________________
🇨🇦 The True North Strong and Free 🇨🇦 Living well is life's best revenge- George Herbert (1593-1633) 2006 C2S, 2024 WRX GT, 911 hot rods on Pelican…. Evolution of a Carrera RST, and Sweet Transplant |
||
![]() |
|
Easily Confused
Join Date: Feb 2005
Location: Republic of Texas
Posts: 429
|
Thanks guys!!
This was a "spare part" after the re-assembly. The new shocks came with washers and this explains why these were left over. These were the only two pieces left after rebuilding the suspension, A/C, brakes, steering rack and top-end of the engine. All said, not too bad. Thanks again! Scott
__________________
Scott C. '08 Cayenne GTS 6MT : '89 Targa GP White/Black - "Oliver's Car" : '11 Mitsu Evo X : '08 Lexus IS350 F-Sport : '01 Toyota Sequoia : 1998 Yamaha V-max : 1979 BMW R65 |
||
![]() |
|