help with wiring

[roadsportusa]

I have a 1976 911 track car. I bought it with no engine and found a 2.7 engine with CSI injection ready to install.
Problem
all the stock wiring has been removed from car.
I will need to wire the engine CSI system
The engine cam with stock CSI harness installed on engine.
I need advise on how to power the CSI harness???

[boyt911sc]

You have the engine harness already as shown in the pictures. I could see the plug/s to AAR, CSV, and air flow meter in your pictures. All you need now is to inspect the 14-pin connector that the chassis side and the engine side are matching (wire color code).

There are 14-pin connector color charts available in the forum (Internet) and I got my own chart. Or you could contact Dennis Powell for assistance. If you feel like driving to Norristown, you could inspect my test stand to your satisfaction.

Start identifying the different plugs and wire terminals for the engine harness. Take pictures and noting the wire color code of the terminals and plugs you could not identify. There are plenty of available help from these guys.

Tony

[timmy2]

If you send me a PM with your contact info I can go over what you may need if your car has had all of the original wiring removed. (Yikes!)
I agree with Tony, I see an existing engine harness in your photos.